1. Home
  2. Products
  3. Pultruded Grating
  4. Pultru…

Pultruded Grating

Pultruded Fiberglass Grating, T-Bar, 38 mm Deep, 33% Open Area (T15-33)

Machs pultruded fiberglass grating T-bar, 38 mm deep with 33% open area (model T15-33), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.

  • ModelT15-33
  • Depth38 mm
  • Open area33%
  • ResinVinyl ester or polyester
  • SurfaceGrit or grooved top

Request a quote with your span and load.

  • Made in Our Own Plant
  • SGS Tested
  • ISO 9001:2015
01

Overview

Machs pultruded fiberglass grating T-bar, 38 mm deep with 33% open area (model T15-33), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.

02

Specifications

Item Details
Product type Pultruded fiberglass grating (FRP)
Model T15-33
Bearing-bar profile T-Bar
Depth 38 mm
Open area 33%
Panel width 915 or 1220 mm
Panel length 3050, 3660 and 6100 mm as standard
Resin Vinyl ester or polyester (phenolic not available)
Surface Grit or grooved top
Lead time Normally about 30 working days
03

Choosing This Model

A 33% open area balances bearing surface with drainage, light and air.

Browse all pultruded grating models, or see molded grating for light-duty areas.

Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.

Start a project

Send Us Your Drawing or Spec

Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.

滚动至顶部

Get a Quote

Let's Start Your Custom FRP Product

Send your drawing, size and load. An engineer at our Nantong plant replies with a factory quotation.

  • Reply usually within 24 hours
  • Factory-direct pricing
  • Made to your drawing
  • NDA on request

Send an Inquiry

Fields marked * are required.

Optional. PDF, DWG, DXF, STEP, JPG or PNG, up to 10 MB each, 3 files max.

Please fill in the information, and we will send the file to your email