- Home
- +
- Products
- +
- Pultruded Grating
- +
- Pultru…
Pultruded Grating
Pultruded Fiberglass Grating, T-Bar, 25 mm Deep, 18% Open Area (T10-18)
Machs pultruded fiberglass grating T-bar, 25 mm deep with 18% open area (model T10-18), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
- ModelT10-18
- Depth25 mm
- Open area18%
- ResinVinyl ester or polyester
- SurfaceGrit or grooved top
Request a quote with your span and load.
- Made in Our Own Plant
- SGS Tested
- ISO 9001:2015
Overview
Machs pultruded fiberglass grating T-bar, 25 mm deep with 18% open area (model T10-18), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
Specifications
| Item | Details |
|---|---|
| Product type | Pultruded fiberglass grating (FRP) |
| Model | T10-18 |
| Bearing-bar profile | T-Bar |
| Depth | 25 mm |
| Open area | 18% |
| Panel width | 915 or 1220 mm |
| Panel length | 3050, 3660 and 6100 mm as standard |
| Resin | Vinyl ester or polyester (phenolic not available) |
| Surface | Grit or grooved top |
| Lead time | Normally about 30 working days |
Choosing This Model
A low open area of 18% gives more bearing surface underfoot, which suits areas where small items or narrow heels are a concern.
Browse all pultruded grating models, or see molded grating for light-duty areas.
Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.
Related products
More FRP Grating From Machs
FRP GratingW Clips (Washer Clips) for Fiberglass Grating, Stainless Steel
FRP GratingPultruded Fiberglass Grating, Heavy-Duty, 25 mm Deep, 50% Open Area (HD 10-50)
FRP GratingM Clips (Saddle Clips) for Fiberglass Grating
FRP GratingPultruded Fiberglass Grating, I-Bar, 25 mm Deep, 60% Open Area (I10-60)
Start a project
Send Us Your Drawing or Spec
Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.








