1. Home
  2. Products
  3. Molded Grating
  4. Molded…

Molded Grating

Molded Fiberglass Grating, 13 mm Deep, 50 × 50 mm Square Mesh

Machs molded fiberglass grating, 13 mm deep with 50 × 50 mm square mesh, is a one-piece molded FRP grating for walkways, platforms and stair treads in wet, coastal and chemical areas. It does not rust or rot and does not conduct electricity.

  • Depth13 mm (1/2 in)
  • Mesh50 × 50 mm square mesh
  • ResinVinyl ester, isophthalic, food-grade isophthalic, phenolic or orthophthalic polyester
  • SurfaceStandard or gritted top

Request a quote with your panel size and load.

  • Made in Our Own Plant
  • SGS Tested
  • ISO 9001:2015
01

Overview

Machs molded fiberglass grating, 13 mm deep with 50 × 50 mm square mesh, is a one-piece molded FRP grating for walkways, platforms and stair treads in wet, coastal and chemical areas. It does not rust or rot and does not conduct electricity.

02

Specifications

Item Details
Product type Molded fiberglass grating (FRP)
Depth 13 mm (1/2 in)
Mesh opening 50 × 50 mm (square mesh)
Panel sizes Standard 1220 × 4000, 1220 × 3660, 1220 × 2440 and 915 × 3050 mm; 1007, 1247 and 1524 mm widths on selected models
Resin Vinyl ester (heavy chemical), isophthalic polyester (general industrial), food-grade isophthalic, phenolic (fire-critical), orthophthalic polyester (light duty)
Surface Standard or gritted top
Colour RAL 1003 yellow, RAL 6010 green, RAL 7004 / 7015 / 7035 grey; phenolic in dark brown
Lead time Normally about 30 working days
03

Choosing This Model

A thin 13 mm panel suits light-duty covers and short spans. Square mesh gives balanced open area for drainage, light and air.

Browse all molded grating models, or compare with pultruded grating for longer spans.

Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.

Start a project

Send Us Your Drawing or Spec

Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.

滚动至顶部

Get a Quote

Let's Start Your Custom FRP Product

Send your drawing, size and load. An engineer at our Nantong plant replies with a factory quotation.

  • Reply usually within 24 hours
  • Factory-direct pricing
  • Made to your drawing
  • NDA on request

Send an Inquiry

Fields marked * are required.

Optional. PDF, DWG, DXF, STEP, JPG or PNG, up to 10 MB each, 3 files max.

Please fill in the information, and we will send the file to your email