- Home
- +
- Products
- +
- Pultruded Grating
- +
- Pultru…
Pultruded Grating
Pultruded Fiberglass Grating, T-Bar, 38 mm Deep, 17% Open Area (T15-17)
Machs pultruded fiberglass grating T-bar, 38 mm deep with 17% open area (model T15-17), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
- ModelT15-17
- Depth38 mm
- Open area17%
- ResinVinyl ester or polyester
- SurfaceGrit or grooved top
Request a quote with your span and load.
- Made in Our Own Plant
- SGS Tested
- ISO 9001:2015
Overview
Machs pultruded fiberglass grating T-bar, 38 mm deep with 17% open area (model T15-17), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
Specifications
| Item | Details |
|---|---|
| Product type | Pultruded fiberglass grating (FRP) |
| Model | T15-17 |
| Bearing-bar profile | T-Bar |
| Depth | 38 mm |
| Open area | 17% |
| Panel width | 915 or 1220 mm |
| Panel length | 3050, 3660 and 6100 mm as standard |
| Resin | Vinyl ester or polyester (phenolic not available) |
| Surface | Grit or grooved top |
| Lead time | Normally about 30 working days |
Choosing This Model
A low open area of 17% gives more bearing surface underfoot, which suits areas where small items or narrow heels are a concern.
Browse all pultruded grating models, or see molded grating for light-duty areas.
Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.
Related products
More FRP Grating From Machs
Start a project
Send Us Your Drawing or Spec
Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.












