- Home
- +
- Products
- +
- Pultruded Grating
- +
- Pultru…
Pultruded Grating
Pultruded Fiberglass Grating, I-Bar, 76 mm Deep, 60% Open Area (I30-60)
Machs pultruded fiberglass grating I-bar, 76 mm deep with 60% open area (model I30-60), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
- ModelI30-60
- Depth76 mm
- Open area60%
- ResinVinyl ester or polyester
- SurfaceGrit or grooved top
Request a quote with your span and load.
- Made in Our Own Plant
- SGS Tested
- ISO 9001:2015
Overview
Machs pultruded fiberglass grating I-bar, 76 mm deep with 60% open area (model I30-60), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
Specifications
| Item | Details |
|---|---|
| Product type | Pultruded fiberglass grating (FRP) |
| Model | I30-60 |
| Bearing-bar profile | I-Bar |
| Depth | 76 mm |
| Open area | 60% |
| Panel width | 915 or 1220 mm |
| Panel length | 3050, 3660 and 6100 mm as standard |
| Resin | Vinyl ester or polyester (phenolic not available) |
| Surface | Grit or grooved top |
| Lead time | Normally about 30 working days |
Choosing This Model
A 60% open area passes more water, light and air, which suits areas that need drainage and ventilation.
Browse all pultruded grating models, or see molded grating for light-duty areas.
Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.
Related products
More FRP Grating From Machs
FRP GratingMolded Fiberglass Grating, 25 mm Deep, 25 × 100 mm Rectangular Mesh
FRP GratingPultruded Fiberglass Grating, I-Bar, 38 mm Deep, 60% Open Area (I15-60)
FRP GratingPultruded Fiberglass Grating, T-Bar, 25 mm Deep, 50% Open Area (T10-50)
FRP GratingPultruded Fiberglass Grating, T-Bar, 25 mm Deep, 60% Open Area (T10-60 ADA)
Start a project
Send Us Your Drawing or Spec
Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.








