- Home
- +
- Products
- +
- Pultruded Grating
- +
- Pultru…
Pultruded Grating
Pultruded Fiberglass Grating, I-Bar, 38 mm Deep, 40% Open Area (I15-40)
Machs pultruded fiberglass grating I-bar, 38 mm deep with 40% open area (model I15-40), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
- ModelI15-40
- Depth38 mm
- Open area40%
- ResinVinyl ester or polyester
- SurfaceGrit or grooved top
Request a quote with your span and load.
- Made in Our Own Plant
- SGS Tested
- ISO 9001:2015
Overview
Machs pultruded fiberglass grating I-bar, 38 mm deep with 40% open area (model I15-40), is a pultruded FRP grating for platforms, walkways and floors that need longer spans and higher loads than molded grating. It does not rust or rot and does not conduct electricity.
Specifications
| Item | Details |
|---|---|
| Product type | Pultruded fiberglass grating (FRP) |
| Model | I15-40 |
| Bearing-bar profile | I-Bar |
| Depth | 38 mm |
| Open area | 40% |
| Panel width | 915 or 1220 mm |
| Panel length | 3050, 3660 and 6100 mm as standard |
| Resin | Vinyl ester or polyester (phenolic not available) |
| Surface | Grit or grooved top |
| Lead time | Normally about 30 working days |
Choosing This Model
A 40% open area balances bearing surface with drainage, light and air.
Browse all pultruded grating models, or see molded grating for light-duty areas.
Check span, load and resin with the grating span and load calculator, or send your drawing for a quotation. See certificates and test reports and the FAQ.
Related products
More FRP Grating From Machs
FRP GratingPultruded Fiberglass Grating, I-Bar, 25 mm Deep, 60% Open Area (I10-60)
FRP GratingPultruded Fiberglass Grating, T-Bar, 25 mm Deep, 35% Open Area (T10-35)
FRP GratingMolded Fiberglass Grating, 38 mm Deep, 19 mm Mini Mesh
FRP GratingMolded Fiberglass Grating, 13 mm Deep, 38 × 38 mm Square Mesh
Start a project
Send Us Your Drawing or Spec
Tell us the size, load and site conditions, and an engineer will reply with a factory quotation, usually within 24 hours.








